CARSYS AVTOPODBOR-M (Maximum kit)
Readings go to your phone and stay there with the car
- Measuring range
- 3500µm
- Accuracy
- ±1%
- Warranty
- Lifetime
The same measurement as the rest of the range, except the result does not get lost. The gauge pairs with a smartphone over Bluetooth, a whole walk-around is saved as one record, and you can come back to it a week later — or show it to a client without measuring everything again.
Russia
Our own production
Automatic
Steel and aluminium, no mode switching
Support
For the life of the instrument
A familiar instrument on the outside, up-to-date electronics inside: the CARSYS internals are updated every year. This listing is built to the current revision, not cleared from a shelf of earlier batches.
Who it suits
Who it suits
For inspection as a job
When you see several cars a day, memory is no help. A saved walk-around is both a report for the client and proof of your work.
For mobile inspection
Readings stay on the phone alongside the car, not on a scrap of paper that disappears by the evening.
For shops with several technicians
The measurement history moves between shifts without anyone retelling it.
Benefits
What it gives you when checking a car
The reading is never lost
A walk-around goes to your smartphone over Bluetooth and is saved whole. A week later you can return to the car or show a client the report without measuring everything again.
A history for every car
Readings are kept with the car, not on a scrap of paper that disappears by the evening. Data passes between shifts without anyone retelling it.
Hidden repairs shown separately
The gauge tells magnetic filler from paint: a panel resprayed after a crash cannot hide behind a tidy number.
You set the sensitivity yourself
On the AVTOPODBOR line the zinc and filler detectors have an adjustable threshold. Tune it to catch even a thin layer of zinc on a suspicious door, or coarsen it when only obvious findings matter: the gauge adapts to the car and to how you inspect, not the other way round.
It works out the metal itself
Steel under the paint or aluminium — the gauge picks the method without you. A mixed-body walk-around stays honest.
A body built for daily use
A polymer coating guards against scratches and fingerprints — a gauge that is in hand all day looks new for longer.
Torch and ultraviolet on one button
One press gives a torch for sills and arches, the second switches to ultraviolet. Under it, fresh coolant and oil seeps in the engine bay give themselves away, as does damp carpet under the dash when the heater matrix leaks. The same light picks out the security fibres in a vehicle's registration papers.
Lifetime warranty
Manufacturer service for the life of the instrument. A professional tool, not a consumable.
Features
Features
Bluetooth and app
Readings sync to your phone and are saved
Measurement memory
Stores the results of a full walk-around
Auto calibration
Automatically tunes the sensor to the working conditions
Magnetic filler detection
Catches attempts to fool the gauge
Sensitivity threshold is adjustable
How it worksZinc detection
Flags a replacement panel that lacks galvanising
Sensitivity threshold is adjustable
How it worksTorch and UV detector
Lights sills and arches without a second torch
Smart calibration
Up to 10 points saved in the gauge memory
Polymer coating
Body protected from scratches and fingerprints
Frost resistant
Works outdoors in winter
All functions
- Measures on ferrous, galvanised and non-ferrous metals
- Works on convex and concave surfaces
- Thickness comparison mode
- Wide measuring range
- Measurement in millimetres and micrometres
- Wide operating temperature range
- Bluetooth BLE and smartphone app
- Saved measurements and reports
- Automatic calibration adjustment
- Auto calibration with manual start
- Informative backlit LCD display
- Automatic metal-type recognition (Fe / NFe)
- Magnetic filler detector with sensitivity control
- Galvanising detector with sensitivity control
- Automatic and manual method selection
- Pressure stabilisation (spring-loaded probe)
- Magnetic induction and eddy-current methods
- Automatic measurement-moment detection
- Spot 0.3 s and continuous 8 readings/sec
- Powered by LR03/AAA cells
- Low-battery indicator
- Protective body coating
- Small, handy size
- Turbo mode for fast measurement
- Automatic power and backlight off
- Smart calibration, 1–10 points with memory
- Colour and sound out-of-range indication
- Distinct sound for ferrous and non-ferrous metal
- Built-in torch and UV detector
- Meets industrial standards
- Lifetime warranty and service
Mobile app
Works with the CARSYS AVTOPODBOR app
Pair the gauge with your phone over Bluetooth — the app shows the reading on a large screen, saves measurement history and builds a professional body report with PDF export.
Anatomy
What the gauge is made of
Hover a list item — the matching point lights up on the gauge.
Spring-loaded probe with a steel tip
The probe is sprung and self-aligns to the surface, so a reading on a curved wing or a door crease stays correct.
Textured grip
The gauge is held one-handed, often in a glove, and pressed to the panel by feel — the texture keeps it from twisting.
35×25 mm backlit display
Large digits plus a status line: mode, metal type and the presence of zinc are visible alongside the reading.
Five buttons under your thumb
Modes, units and power switch without lifting the gauge off the panel or reaching over with your other hand.
Built-in torch
A dedicated button and LEDs beside the probe: sills, arches and the engine bay are lit without a second torch in your teeth.
Measurement modes
Measurement modes
Automatic for walking around a car, and manual modes for when you need the gauge to use one specific method.
01
Auto
Picks the method from the metal under the probe
02
Magnetic induction
Forced mode for ferrous metals
03
Eddy current
Forced mode for non-ferrous metals
How it works
How it works
The gauge measures total coating thickness over metal. Run the probe across the section — this is exactly how it behaves on a real panel.
Gauge reading
120µm
Never repainted
Factory finish
Factory finish
120 µm
Repainted
200 µm
Body filler repair
620 µm
Drag across the section or use arrow keys
Layers are drawn to scale by thickness
Specifications
Specifications
Tap a specification to see what it means on a car body
Measurement
Measuring range0–3500 µm
A factory finish is usually 80–150 µm, a respray noticeably more, and filler repairs run past a thousand. The upper limit exists for those spots: at the ceiling the gauge would stop telling thick repairs from very thick ones.
Accuracy±1% + 1 µm (0–500); ±1% + 10 µm (501–3500)
The first number is a share of the reading itself, the second a fixed addition. On a thin factory layer the addition dominates; on thick repairs the percentage does. That is why it is given per band rather than as one averaged figure.
Resolution1 µm
The step by which the number on screen changes. The gauge does not show differences finer than this step. It should not be confused with accuracy — they are different things.
Reading time0.3 s · 0.125 s continuous
How long the gauge thinks over one spot. Inspecting a car means dozens of touches, and fractions of a second add up to minutes at the bonnet.
Probe typeCombined (Fe / NFe)
A magnetic probe works on steel, an eddy-current one on aluminium. A combined probe holds both principles in one tip and therefore suits cars with mixed bodywork.
SubstratesSteel, Cast iron, Aluminium, Galvanised steel
The metals the gauge measures coating on. Gauges of this type do not work on plastic bumpers or fibreglass at all: there is no metal to measure the thickness from.
Unitsmm / µm
Micrometres are standard in Russia and Europe: a factory finish reads naturally in them, while millimetres are left for thick repair layers.
The instrument
Display35×25 mm, backlit
The visible screen area. The gauge is held at arm’s length by a sill or inside an arch, so digit size matters more than the number of lines.
Dimensions118×40×26 mm
Length, width and height of the body. They decide whether the gauge fits a jacket pocket and slips into the gap between an open door and the pillar.
Weight without battery70 g
The weight of the body itself. With batteries fitted the gauge is heavier — worth remembering when comparing figures from different sources.
Power2×LR03/AAA
The battery type. Standard cells can be swapped on the road and bought at any filling station, unlike a proprietary pack.
Auto power-offYes
The gauge switches itself off if left on in a pocket or a bag. Without it, flat batteries are discovered exactly when the gauge is needed.
Conditions and warranty
Operating temperature-30…+50 °C
The limits within which the manufacturer stands behind the readings. Inspections in freezing yards are routine, so the lower limit matters more than the upper.
Humidityup to 80%
The upper humidity limit for measurements. Inspecting in the rain or straight after a wash is exactly this case.
WarrantyLifetime
The period during which the manufacturer repairs or replaces the gauge. It runs from purchase, so keep the receipt.
A walk-around is not one number but a dozen and a half points: wings, doors, bonnet, roof, pillars. A gauge with memory turns them into a single saved record for the car, instead of figures you have to hold in your head on the way to the next panel.
In the box
In the box
Everything needed to start working is already in the box.
- CARSYS AVTOPODBOR-M thickness gauge
- Steel calibration base
- Aluminium calibration base
- Set of 8 reference foils
- Silicone shock-absorbing cover
- Wrist strap
- Batteries, 2 pcs
- User manual and warranty card
- Android smartphone app
- Magnetic filler sample for detector testing
- Storage pouch
How it differs from neighbouring models
How it differs from neighbouring models
Within a family the gauges measure identically — the difference is what comes in the box. A different family differs in the measuring side itself.
Accessories for this model
Accessories for this model
Additional accessories are sold separately.
Trusted by many
Buyers have already checked
The same gauge is chosen by car inspectors, dealers and production floors — and rated on marketplaces.
15+
years on the market
500,000+
gauges produced
12
export countries
Hover to see the list
- Kazakhstan
- Kyrgyzstan
- Uzbekistan
- Armenia
- Azerbaijan
- Egypt
- India
- USA
- United Kingdom
- Germany
- Spain
- France
Customer ratings on marketplaces
4.98
10,000+ reviews
4.95
5,000+ reviews
5.00
1,500+ reviews
Why CARSYS
What sets the gauge apart
Zinc detection
Helps spot a replaced panel
Factory galvanising can’t be faked with a repaint — it’s either there or it isn’t. The gauge lets you compare neighbouring panels: one bare panel among galvanised ones. Matching paint thickness alone doesn’t mean "original panel".
Fe / NFe
Identifies the metal on its own
Steel wing, aluminium bonnet — the gauge works it out for you. Picking the wrong mode and getting a false reading is not possible.
0.3 s
A fraction of a second per reading
In continuous mode it drops to 0.125 seconds, 8 readings per second. A full walk-around fits into a few minutes, notes included.
−30 °C
Works in the cold
An inspection in a January car park does not have to move into a heated bay. The upper limit is plus 50.
Omsk
Our own production
The gauge is designed and assembled in Russia. Warranty repair and verification happen in-country, not across an ocean.
Lifetime
Warranty and support
The maker services the gauge and fixes its own defects free of charge for the whole service life. A gauge is a tool, not a consumable.
Frequently asked questions
Frequently asked questions
Does it work without a phone?
Yes. Bluetooth and the app add memory and history, but the gauge measures and displays on its own, like every other model in the range.
Which platform is the app for?
Android. The app is part of the Maximum kit.
How does it differ from the standard AVTOPODBOR?
The measuring side is identical. The difference is the phone connection and stored readings — that is what you are buying it for.
What does the UV detector actually show?
Fresh traces of technical fluids: engine oil, transmission fluid and most coolants fluoresce on their own, with no additives. Inside the car ultraviolet reveals organic stains — and a recent shampoo clean along with them, since detergents contain optical brighteners and glow an even blue across a whole seat; blood, by contrast, does not glow but darkens. With documents it helps: on genuine registration papers the security fibres glow while the paper itself does not, so a forgery printed on office paper lights up whole. It does not replace a proper banknote detector, though — the fine marks on banknotes are meant for a dedicated device. Look in the shade.
Can you see the reading in bright sun? Cars are inspected outdoors, after all.
Yes — in sunlight the screen reads even better. The display is a monochrome FSTN LCD: it emits no light of its own and works on reflected light, so the brighter the day, the crisper the figures. With a colour screen it is the other way round — on a clear day you have to shade it with your hand and look for somewhere darker. The backlight comes on at the press of a button for a dark bay, an underground car park or an evening check in the yard, and switches itself off after a minute of inactivity to save the cells. A winter walk-around is covered too: the gauge is rated down to −30 °C.
Where to buy
This gauge is sold through our own store and on marketplaces. Buying from an official seller is what makes the warranty and support real.